5. Error Handling¶
In every distributed system, the robustness of your application depends on its ability to recover gracefully from unexpected events. The AMPS client provides the building blocks necessary to ensure your application can recover from the kinds of errors and special events that may occur when using AMPS.
Exceptions¶
Generally speaking, when an error occurs that prohibits an operation
from succeeding, AMPS will throw an exception. AMPS exceptions
universally derive from com.crankuptheamps.client.exception.AMPSException
,
so by catching AMPSException
, you will be sure to catch anything AMPS throws. For
example:
import com.crankuptheamps.client.Client;
import com.crankuptheamps.client.exception.AMPSException;
public void readAndEvaluate(Client client) {
Scanner scanner = new Scanner(System.in);
String payload = scanner.nextLine();
// write a new message to AMPS
if ( payload != null) {
try {
client.publish("UserMessage", " { \"data\" : \"" + payload + "\" }");
}
catch (AMPSException e) {
System.err.println("An AMPS exception occurred: " + e.toString());
e.printStackTrace();
}
}
}
Example 5.1: Catching an AMPSException
In this example, if an error occurs, the program writes the error to
stderr
and the publish()
command fails. However, client is
still usable for continued publishing and subscribing. When the error
occurs, the exception is written to stderr
, which calls the exception’s
toString()
method. As with most Java exceptions, toString()
will
convert the Exception
into a string that includes a message. The
printStackTrace()
method will write to stderr
the stack trace
and information on any ”inner” exceptions (exceptions from outside of
AMPS that caused AMPS to throw an exception).
AMPS exception types vary based on the nature of the error that occurs.
In your program, if you would like to handle certain kinds of errors
differently than others, you can catch
the appropriate subclass of
AMPSException
to detect those specific errors and do something
different.
public CommandId CreateNewSubscription(Client client) {
CommandId id = null;
string topicName;
while (id == null) {
/* Our program is an interactive program that attempts to retrieve a topic
* name (or regular expression) from the user.
*/
topicName = askUserForTopicName();
try {
Command command = new Command("subscribe").setTopic(topicName);
MessagePrinter mp = new MessagePrinter();
id = client.executeAsync(command, mp);
}
catch(BadRegexTopicException ex) {
/* This line indicates that the program catches the BadRegexTopicException
* exception and displays a specific error to the user indicating the topic
* name or expression was invalid. By not returning from the function in
* this catch block, the while loop runs again and the user is asked for
* another topic name.
*/
System.err.println("Error: bad topic name " +
"or regular expression " + topicName +
". The error was: " + ex.toString());
// we’ll ask the user for another topic
}
catch(AMPSException ex) {
/* If an AMPS exception of a type other than BadRegexTopicException is thrown
* by AMPS, it is caught here. In that case, the program emits a different
* error message to the user.
*/
System.err.println("Error: error setting " +
"up subscription to topic " +
topicName + ". The error was: " +
ex.toString());
return null; // give up
}
}
return id;
}
Example 5.2: Catch AMPSException Subclasses
Exception Types¶
Each method in AMPS documents the kinds of exceptions that it can throw. For reference, Appendix A. Exceptions contains a list of all of the exception types you may encounter while using AMPS, when they occur, and what they mean.
Exception Handling and Asynchronous Message Processing¶
When using asynchronous message processing, exceptions thrown from the message handler are silently absorbed by the AMPS Java client by default. The AMPS Java client allows you to register an exception listener to detect and respond to these exceptions. When an exception listener is registered, AMPS will call the exception listener with the exception. See Example 5.5 for details.
Controlling Blocking with Command Timeout¶
The named convenience methods and the Command
class provide a
timeout
setting that specifies how long the command should wait
to receive a processed
acknowledgment from AMPS. This can be helpful
in cases where it is important for the caller to limit the amount of time
to block waiting for AMPS to acknowledge the command. If the AMPS client
does not receive the processed acknowledgment within the specified
time, the client sends an unsubscribe
command to the server to
cancel the command and throws an exception.
Acknowledgments from AMPS are processed by the client receive thread on the same socket as data from AMPS. This means that any other data previously returned (such as the results of a large query) must be consumed before the acknowledgment can be processed. An application that submits a set of SOW queries in rapid succession should set a timeout that takes into account the amount of time required to process the results of the previous query.
Disconnect Handling¶
Every distributed system will experience occasional disconnections between one or more nodes. The reliability of the overall system depends on an application’s ability to efficiently detect and recover from these disconnections. Using the AMPS Java client’s disconnect handling, you can build powerful applications that are resilient in the face of connection failures and spurious disconnects.
Using a Heartbeat to Detect Disconnection¶
The AMPS client includes a heartbeat feature to help applications detect disconnection from the server within a predictable amount of time. Without using a heartbeat, an application must rely on the operating system to notify it when a disconnect occurs. For applications that are simply receiving messages, it can be impossible to tell whether a socket is disconnected or whether there are simply no incoming messages for the client.
When you set a heartbeat, the AMPS client sends a heartbeat message to the AMPS server at a regular interval, and waits a specified amount of time for the response. If the operating system reports an error on send, or if there is no message received from the server within the specified amount of time, the AMPS client considers the server to be disconnected. Likewise, the server will ensure that traffic is sent to the client at the specified interval, using heartbeat messages when no other traffic is being sent to the client. If, after sending a heartbeat message, no traffic from the client arrives within a period twice the specified interval, the server will consider the client to be disconnected or nonresponsive.
The AMPS client processes heartbeat messages on the client receive thread, which is the thread used for asynchronous message processing. If your application uses asynchronous message processing and occupies the thread for longer than the heartbeat interval, the client may fail to respond to heartbeat messages in a timely manner and may be disconnected by the server.
Managing Disconnection¶
The HAClient
class, included with the AMPS Java client, contains a
disconnect handler and other features for building highly-available
applications. The HAClient
includes features for managing a list of
failover servers, resuming subscriptions, republishing in-flight
messages, and other functionality that is commonly needed for high
availability. 60East recommends using the HAClient
for automatic
reconnection wherever possible, as the HAClient disconnect handler has
been carefully crafted to handle a wide variety of edge cases and
potential failures.
If an application needs to reconnect or fail over, use an
HAClient
, and the AMPS client library will automatically
handle failover and reconnection. You control which servers
the client fails over to using an implementation of the
ServerChooser
interface, and you can control the timing of
the failover using an implementation of the ReconnectDelayStrategy
interface.
Tip
For most applications, the combination of the HAClient
disconnect handler and a ConnectionStateListener
gives
you the ability to monitor disconnections and add custom
behavior at the appropriate point in the reconnection
process.
If you need to add custom behavior to the failover (such as logging,
resetting an internal cache, refreshing credentials and so on), the
ConnectionStateListener
class allows your application to
be notified and take action when disconnection is detected and at
each stage of the reconnection process.
To extend the behavior of the AMPS client during reconnection, implement
a ConnectionStateListener
.
Replacing Disconnect Handling¶
In some cases, an application does not want the AMPS client to reconnect, but instead wants to take a different action if disconnection occurs. For example, a stateless publisher that sends ephemeral data (such as telemetry or prices) may want to exit with an error if the connection is lost rather than risk falling behind and providing outdated messages. Often, in this case, a monitoring process will start another publisher if a publisher fails, and it is better for a message to be lost than to arrive late.
To cover cases where the application has unusual needs, the AMPS client library allows an application to provide custom disconnect handling.
Your application gets to specify exactly what happens when a
disconnect occurs by supplying a function to
client.setDisconnectHandler()
, which is invoked whenever
a disconnect occurs. This may be helpful for situations
where a particular connection needs to do something
completely different than reconnecting or
failing over to another AMPS server.
Caution
Setting the disconnect handler completely replaces the disconnection
and failover behavior for an HAClient
and provides the only disconnection
and failover behavior for a Client
.
The handler runs on the thread that detects the disconnect. This may be the client receive thread (for example, if the disconnect is detected due to heartbeating) or an application thread (for example, if the disconnect is detected when sending a command to AMPS).
The example below shows the basics:
public class TestDisconnect {
private String _uri = null;
public TestDisconnect(String uri) throws AMPSException {
this._uri = uri;
Client client = new Client("TestDiscon-Client");
ExitOnDisconnectHandler dh = new ExitOnDisconnectHandler();
client.setDisconnectHandler(dh);
client.connect(this._uri);
for (Message msg : client.subscribe("order") )
{
// ...
}
}
class ExitOnDisconnectHandler implements ClientDisconnectHandler{
public void invoke(Client client) {
try {
// At this point, the client is already disconnected
// so calling close() isn't necessary.
System.exit(1);
} catch(Exception e){;}
}
}
class MsgPrinter implements MessageHandler
{
public void invoke(Message m) {
System.out.println(m.getData());
}
}
}
Example 5.3: Supplying a Disconnect Handler
Unexpected Messages¶
The AMPS Java client handles most incoming messages and takes appropriate action. Some messages are unexpected or occur only in very rare circumstances. The AMPS Java client provides a way for clients to process these messages. Rather than providing handlers for all of these unusual events, AMPS provides a single handler function for messages that can’t be handled during normal processing.
Your application registers this handler by setting the
lastChanceMessageHandler
for the client. This handler is called when
the client receives a message that can’t be processed by any other
handler. This is a rare event, and typically indicates an unexpected
condition.
For example, if a client publishes a message that AMPS cannot parse,
AMPS returns a failure acknowledgment. This is an unexpected event, so
AMPS does not include an explicit handler for this event, and failure
acknowledgments are received in the method registered as the
lastChanceMessageHandler
.
Your application is responsible for taking any corrective action needed. For example, if a message publication fails, your application can decide to republish the message, publish a compensating message, log the error, stop publication altogether, or any other action that is appropriate.
Unhandled Exceptions¶
In the AMPS Java client, exceptions can occur that are not thrown to the user. For example, when an exception occurs in the process of reading subscription data from the AMPS server, the exception occurs on a thread inside of AMPS. Consider the following example:
public class MyApp {
...
public static void waitToBePoked(Client client) {
Command command = new Command(
"subscribe"
).setTopic(
"pokes"
).setFilter(
"/Pokee LIKE'" + System.getProperty("user.name") + "-.*"
).setTimeout(5000);
client.execute(command, new MsgPrinter());
Console c = System.console();
Reader r = c.reader();
while(r.read() == null) {
Thread.sleep(10);
}
}
class MsgPrinter implements MessageHandler {
public void invoke(Message m) {
System.out.println(m.getData());
}
}
}
Example 5.4: Where do Exceptions go?
In this example, we set up a simple subscription to wait for messages on the “pokes” topic, whose “Pokee” tag begins with our user name. When messages arrive, we print a message out to the console, but otherwise our application waits for a key to be pressed.
Inside of the AMPS client, the client creates a new thread of execution that reads data from the server, and invokes message handlers and disconnect handlers when those events occur. When exceptions occur inside this thread, however, there is no caller for them to be thrown to, and by default they are ignored.
In applications where it is important to deal with every issue that
occurs in using AMPS, you can set an ExceptionListener
via
Client.setExceptionListener()
that receives these otherwise unhandled
exceptions. Making the modifications shown in the example below, to our previous
example, will allow those exceptions to be caught and handled. In this
case we are simply printing those caught exceptions out to the console.
public class MyApp {
...
client.setExceptionListener(new CustomExceptionListener());
...
}
class CustomExceptionListener implements ExceptionListener
{
public void exceptionThrown(Exception ex) {
System.out.println(ex.toString());
}
}
Example 5.5: Exception Listener
In this example we have added a call to setExceptionListener()
,
registering a simple function that writes the text of the exception out
to the console. Even though our application waits for a user to press a
key, messages to the console will still be produced, both as incoming
“poke” messages arrive, and as issues arise inside of AMPS.
If your application will attempt to recover from an exception thrown on the background processing thread, your application should set a flag and attempt recovery on a different thread than the thread that called the exception listener.
Tip
At the point that the AMPS client calls the exception listener, it has handled the exception. Your exception listener must not rethrow the exception (or wrap the exception and throw a different exception type).
Detecting Write Failures¶
The publish
methods in the Java client deliver the
message to be published to AMPS and then return immediately, without
waiting for AMPS to return an acknowledgment. Likewise, the
sowDelete
methods request deletion of SOW messages, and return
before AMPS processes the message and performs the deletion. This
approach provides high performance for operations that are unlikely to
fail in production. However, this means that the methods return before
AMPS has processed the command, without the ability to return an error
in the event that the command fails.
The AMPS Java client provides a FailedWriteHandler
that is called
when the client receives an acknowledgment that indicates a failure to
persist data within AMPS. To use this functionality, you implement the
FailedWriteHandler
interface, construct an instance of your new class,
and register that instance with the setFailedWriteHandler()
method
on the client. When a persisted
acknowledgment returns that indicates
a failed write, AMPS calls the registered handler method with information
from the acknowledgment message, supplemented with information from the
client publish store (if one is available). Your client can log this
information, present an error to the user, or take whatever action is
appropriate for the failure.
If your application needs to know whether publishes succeeded and are durably persisted, the following approach is recommended:
- Set a
PublishStore
on the client. This will ensure that messages are retransmitted if the client becomes disconnected before the message is acknowledged and requestpersisted
acknowledgments for messages. - Install a
FailedWriteHandler
. In the event that AMPS reports an error for a given message, that event will be reported to theFailedWriteHandler
. - Call
publishFlush()
and verify that all messages are persisted before the application exits.
When no FailedWriteHandler
is registered, acknowledgments that
indicate errors in persisting data are treated as unexpected messages
and routed to the LastChanceMessageHandler
. In this case, AMPS
provides only the acknowledgment message and does not provide the
additional information from the client publish store (even when
one is available).
Monitoring Connection State¶
The AMPS client interface provides the ability to set one or more connection state listeners. A connection state listener is a callback that is invoked when the AMPS client detects a change to the connection state.
A connection state listener may be called from the client receive thread. An application should not submit commands to AMPS from a connection state listener, or the application risks creating a deadlock for commands that wait for acknowledgment from the server.
The AMPS client provides the following state values for a connection state listener:
State | Indicates |
---|---|
Connected | The client has established a connection to
AMPS. If you are using a If you are using an Most applications that use An application should not submit commands to
AMPS from the connection state listener
while the client is in this state unless
the application knows that the state has been
delivered from a |
LoggedOn | The client has successfully logged on to
AMPS. If you are using a If you are using an This state is delivered after the client is logged on, but before recovery of client state is complete. Recovery will continue after delivering this state: the application should not submit commands to AMPS from the connection state listener while the client is in this state if further recovery will take place. |
HeartbeatInitiated | The client has successfully started heartbeat monitoring with AMPS. This state is delivered if the application has enabled heartbeating on the client. This state is delivered before recovery of the client state is complete. Recovery may continue after this state is delivered. The application should not submit commands to AMPS from the connection state listener until the client is completely recovered. |
PublishReplayed | Delivered when a client has completed replay of the publish store when recovering after connecting to AMPS. This state is delivered when the client has a PublishStore configured. If the client has a subscription manager set,
(which is the default for an |
Resubscribed | Delivered when a client has re-entered subscriptions when recovering after connecting to AMPS. This state is delivered when the client has a
subscription manager set (which is the default
for an |
Disconnected | The client is not connected. For an |
Shutdown | The client is shut down. For an |
Table 5.1: ConnectionStateListener values
The enumeration provided for the connection state listener also includes
a value of UNKNOWN
for use as a default or to represent additional
states in a custom Client
implementation. The 60East implementations
of the client do not deliver this state.
The following table shows examples of the set of states that will be delivered
during connection, in order, depending on what features
of the client are set. Notice that, for an instance of the Client
class,
this table assumes that the application calls both connect()
and
logon()
. For an HAClient
, this table assumes that the HAClient
is
using the default DisconnectHandler
for the HAClient
.
Configuration | States |
---|---|
Subscription Manager Publish Store |
Connected LoggedOn PublishReplayed Resubscribed |
Subscription Manager Publish Store Heartbeat Set |
Connected LoggedOn HeartbeatInitiated PublishReplayed Resubscribed |
Subscription Manager | Connected LoggedOn Resubscribed |
Subscription Manager Heartbeat Set |
Connected LoggedOn HeartbeatInitiated Resubscribed |
|
Connected LoggedOn |
Table 5.2: Sequence of states for connection